How to Fix Canon Support Code B200, Solution and Explanation

What is the Support Code/Error Code B200 on Canon Printer?

Support code B200 is mostly found on Canon printers, support code B200 means the voltage or temperature of the print head is not normal, could defect or not detected. A print head is a part of a printer that distributes the ink from the cartridges onto the paper, which means it's a very important part of the printer. 

Step by Step How to repair and fix Support Code B200 on Canon Printer

How to fix Support Code B200 Error is a very simple way. These troubleshooting guides can be applied for 2 cartridges and 4 or more cartridge Canon printers.

1. Reinstall printhead from the printer.
• Open the top cover of the printer then wait for the cartridge cradle to stop moving.
• Then remove the ink cartridges from your printer.
• Lifting the locking lever on the cartridge cradle. 
• Then softly remove the printhead from the printer (for 4 or more cartridge only).
• Softly reinstall the printhead into your Canon printer and lock the lever back (for 4 or more cartridge only).
• Reinstall all of the cartridges into the printer then close the top cover.
• Unplug the printer power cable from the electric source and leave it for at least 5 minutes, wait for the printhead to cool and there is nothing residual electricity on the printer.
• Plug the printer power cable back, turn on your printer.
• Do a head cleaning cycle or do a print test.
2. Reinstall the printer driver, you can download it from the official support page, and follow the instruction.
3. Replace the ink cartridge with a new ink cartridge, bad cartridge rarely cause the B200 error, but it can occur. 

Recommended to You: Download Canon Service Tool V3400 for maintenance and reset

If your Canon MX922 show error code b200 you can try to solve by following step-by-step guide on How to Canon MX922 Error Code B200

If the support code B200 still occurred try to replace the printer mainboard. If you think you're not sure about these, please contact the Canon printer service near you. But if your printer status is showing Error message Support Code B500 you can fix by yourself here. The error may appear as a support code B200 Canon printer, error code B200 reset, general error.